Sacrifice Chapter 2 Park stunt scooter

Sacrifice Chapter 2 Park stunt scooter - for those looking for a reliable model suitable for the widest possible range of conditions. It features the new patented SLC compression system, developed by Sacrifice specifically for this model, known for its extremely simple maintenance and versatility. This innovative model is perfectly suited to any tricks and is compatible with HIC and SCS compression systems.

• Handlebar: 6061-T6 Al, 600mm Wide x 650mm High
• Clamp: Sacrifice C2 Forged 2 bolt clamp
• Compression type: SLC
• Deck: Extruded 6061-T6 Al, 115mm x 520mm, Integrated 82.5 deg Headtube
• Wheels: 110mm Sacrifice Peephole 88A PU
• Bearings: Sacrifice Roller Coaster Bearing
• With brake
• Weight: 3.3 kg

STUNT SCOOTER RULES OF USE

Safety measures

As with any moving device, riding a scooter can be dangerous. Read all the rules of use before riding. Pay special attention to the following advice:

1. Always wear protective equipment, such as ANSI, SNELL, CPSC or ASTM certified helmets, knee and elbow pads, long-sleeved shirts and long trousers.
2. Always wear closed footwear and make sure it is properly fastened. Never use the scooter barefoot or wearing sandals.
3. Always follow applicable traffic and scooter-riding rules. Watch out for other vehicles and give way to pedestrians.
4. Do not make any modifications to the device's construction, and do not use any accessories that are not supplied with the scooter.
5. Do not ride while holding the device with only one hand. Always hold the handlebar firmly with both hands.
6. When riding the scooter, do not make sudden turns, and do not lean your whole body on the handlebar in a turn, as it may twist and you may lose control.
7. Do not ride the scooter on slippery, wet road surfaces, as the polyurethane wheels may slip and you may lose control. Avoid roads where water, mud, sand, gravel, leaves or other debris accumulate. When riding in rain, wheel grip, braking and visibility deteriorate.
8. Do not ride the scooter on steep slopes, as the scooter may become uncontrollable or the brakes may not be sufficiently effective. Be especially careful when riding on uneven terrain. Do not ride at high speed downhill.
9. Ride the scooter only on level terrain; do not ride on wet, uneven, stony or gravel surfaces. Do not ride the scooter at dusk or at night, or on damp or icy surfaces.
10. Avoid potholes, drainage grates, sudden changes in the road surface, as the scooter may stop abruptly.
11. Before starting to ride, press the brake pedal and check that it works. After prolonged use, the brake pedal may become hot, so do not touch it after stopping, as you may get burned.
12. Turn the scooter's handlebar left and right, and check that the mechanism works properly. Before riding, also make sure the handlebar is held firmly.
13. Children must always ride under adult supervision. Before riding, the supervising person should check the scooter to ensure all its parts are properly secured to avoid an accident.
14. Since fingers can get pinched while assembling the scooter, adults must help children assemble and adjust the scooter. Do not touch moving parts or clamping mechanism parts to avoid injuring your fingers. Make sure all parts are securely mounted.
15. If you do not follow the safety advice above, you may be injured.
16. Promptly replace worn or broken device parts.

6-month warranty; warranty does not cover wearing parts

The warranty is void if the device fails due to mechanical damage to the scooter, improper use, or performing unauthorized maneuvers with it.

CHECK BEFORE RIDING

First, check that the brakes work.

Second, check that the handlebar is held properly and firmly.

Third, check that the wheels are held firmly and rotate without obstruction.

Once you have checked everything and read the safety advice, you can start riding the scooter.

USER MANUAL AND DEVICE MAINTENANCE

1. Turn the scooter's wheels and handlebar to check whether the mechanism bearings work smoothly. If necessary, adjust them after the first few rides by tightening or loosening the clamping bolts.
2. It is recommended to fully disassemble and clean the scooter at least every 6 months. If a part needs replacing, make sure to order the correct part from the supplier (dealer).
3. If the front part of the scooter (handlebar) is wobbly, the headset mechanism is probably not properly secured. Do not ride with a loose handlebar. Remove the handlebar and tighten the headset compression bolt with a hex key. Reassemble the handlebar and firmly tighten the handlebar clamp.
4. Polyurethane wheels may wear out over time. Contact the seller and replace them with new ones to ensure safe riding.
5. With regular use of the scooter, the wheels and wheel bearings may wear out. They can be easily replaced. Unscrew the nuts securing the wheel axle and remove the wheel. Replace the wheel or bearings, then firmly tighten the nuts again with a wrench from both sides of the wheel. Make sure to order the correct wheels or wheel bearings from the supplier (dealer).
6. Clean dirt and dust from the scooter with a damp cloth. Do not use cleaners or solvents that could damage the surface. Do not use alcohol or substances containing alcohol or ammonia for cleaning, as they may damage the surface, dissolve parts, or soften stickers or sticker adhesive.
7. Before riding, make sure all parts are securely mounted.
8. Mechanisms or parts may perform worse over time. If any mechanism or part is not working as it should, it is recommended not to use the device and to contact the supplier (dealer) or importer to replace the mechanisms or parts with new ones.