Sacrifice Hustler V2 Stunt Scooter

The Sacrifice Hustler V2 stunt scooter is everything a beginner scooter rider needs. Reliable parts and geometry inherited from the more expensive Sacrifice models come together perfectly in this scooter. An excellent choice as a first scooter.

• Handlebar: 13A Steel, 550mm wide x 600mm high
• Clamp: 2 bolt collar clamp with printed logo detail
• Compression: IHC
• Deck: Extruded 6061-T6 A1, 115mm x 500mm, integrated 82.5 deg headtube
• Wheels: 110mm split forked 5 spoke wheel, 70mm 6061-T6 Al core with laser etched logo detail, 88A PU
• Bearings: ABEC 7
• With brake
• Weight: 3.6 kg

STUNT SCOOTER RULES OF USE

Safety measures

As with any moving device, riding a scooter can be dangerous. Before riding, read all the rules of use. Pay particular attention to the following tips:

1. Always wear protective equipment such as an ANSI, SNELL, CPSC or ASTM certified helmet, knee and elbow protection, a long-sleeved shirt and long trousers.
2. Always wear closed shoes and make sure they are properly fastened. Do not use the scooter barefoot or in sandals.
3. Always follow the applicable traffic and scooter riding rules. Watch out for other vehicles and give way to pedestrians.
4. Do not make any changes to the structure of the device and do not use any accessories that are not supplied with the scooter.
5. Do not ride holding the device with only one hand. Hold the grips firmly with both hands.
6. When riding the scooter, do not make sharp turns and do not lean on the handlebars with your whole body in a turn, as they may twist and you may lose control.
7. Do not ride the scooter on slippery or wet road surfaces, as the polyurethane wheels may slip and you may lose control. Avoid roads where water, mud, sand, gravel, leaves or other debris accumulate. Riding in the rain reduces wheel grip on the road surface and worsens braking and visibility.
8. Do not ride the scooter on steep slopes, as the scooter may become uncontrollable or the brakes may not work well enough. Be especially careful when riding on uneven terrain. Do not ride at high speed downhill.
9. Ride the scooter only on level terrain; do not ride on wet, uneven, rocky or gravel surfaces. Do not ride the scooter at dusk or at night, or on damp or icy surfaces.
10. Avoid potholes, drainage grates and sudden changes in the road surface, as the scooter may stop abruptly.
11. Before you start riding, press the brake pedal and check that it works. With prolonged use of the scooter, the brake pedal may become hot, so do not touch it after stopping, as you may get burned.
12. Turn the scooter handlebar left and right and check that the mechanism works properly. Before you start riding, also make sure the grips are held firmly.
13. Children must always ride under adult supervision. Before riding, the supervising person should check the scooter to ensure all its parts are properly fastened and an accident is avoided.
14. Because fingers can be pinched when assembling the scooter, adults must help children assemble and adjust the scooter. Do not touch moving parts or the parts of the clamping mechanism to avoid injuring your fingers. Make sure all parts are firmly mounted.
15. If you do not follow the safety tips above, you may get injured.
16. Promptly replace worn or broken parts of the device.

6-month warranty; the warranty does not cover wear parts

The warranty is void if the device fails due to mechanical damage to the scooter, improper use or performing unauthorised manoeuvres with it.

CHECK BEFORE RIDING

First, check that the brakes work.

Second, check that the grips are held properly and firmly.

Third, check that the wheels are firmly attached and spin without disturbance.

Once you have checked everything and read the safety tips, you can start riding the scooter.

USER INSTRUCTIONS AND DEVICE MAINTENANCE

1. Turn the wheels and handlebar of the scooter to check whether the bearings of the mechanisms run smoothly. If necessary, adjust them after the first few rides by tightening or loosening the clamping bolts.
2. It is recommended to fully disassemble and clean the scooter at least every 6 months. If a part needs to be replaced, make sure to order the correct part from the supplier (dealer).
3. If the front part of the scooter (handlebar) is wobbly, the fork/steerer mechanism is most likely not properly tightened. Do not ride with a loose handlebar. Remove the handlebar and tighten the compression bolt with a hex key. Reinstall the handlebar and firmly tighten the clamp.
4. Polyurethane wheels may wear out over time. Contact the seller and replace them with new ones so that riding is safe.
5. With regular use of the scooter, the wheels and wheel bearings may wear out. They can be easily replaced. Unscrew the nuts securing the wheel axle and pull out the wheel. Replace the wheel or bearings and firmly retighten the nuts with a wrench from both sides of the wheel. Make sure to order the correct wheels or wheel bearings from the supplier (dealer).
6. Clean dirt and dust from the scooter with a damp cloth. Do not use cleaners or solvents that may damage the surface. Do not use alcohol or substances containing alcohol or ammonia for cleaning, as they may damage the surface, dissolve parts or soften the stickers or sticker adhesive.
7. Before you start riding, make sure all parts are firmly mounted.
8. Mechanisms or parts may work worse over time. If any mechanism or part does not work as it should, it is recommended not to use the device, to contact the supplier (dealer) or importer and to replace the mechanisms or parts with new ones.