Sacrifice Player V2 stunt scooter

Sacrifice Player V2 stunt scooter - a great choice when looking for a next-level scooter for all kinds of tricks. Reliable parts and geometry inherited from the most premium Sacrifice models fit together perfectly in this scooter, while also allowing for a wide range of modifications.

• Handlebar: 13A Steel, 550mm wide x 600mm high
• Clamp: 2 bolt collar clamp with CNC detail and logo detail
• Compression: IHC
• Deck: Extruded 6061-T6 A1, 115mm x 515mm, integrated 82.5 deg headtube
• Wheels: 120mm split forked 5 spoke wheel, 88A PU
• Bearings: ABEC 7
• With brake

STUNT SCOOTER USAGE RULES

Safety measures

As with other moving devices, riding a scooter can be dangerous. Before riding, read all the usage rules. Pay particular attention to the following tips:

1. Always wear protective gear, such as ANSI, SNELL, CPSC or ASTM certified helmets, knee and elbow protection, long-sleeved shirts and long trousers.
2. Always wear closed shoes and make sure they are properly fastened. Do not use the scooter barefoot or in sandals.
3. Always follow the applicable traffic and scooter riding rules. Watch out for other vehicles and give way to pedestrians.
4. Do not make any changes to the structure of the device and do not use any accessories that are not supplied with the scooter.
5. Do not ride holding the device with only one hand. Hold the grips firmly with both hands.
6. When riding, do not make sharp turns and do not lean your whole body on the grips in a turn, as they may twist and you may lose control.
7. Do not ride the scooter on slippery or wet road surfaces, as the polyurethane wheels may slip and you may lose control. Avoid roads where water, mud, sand, gravel, leaves or other debris accumulate. In the rain, wheel grip on the road surface, braking and visibility deteriorate.
8. Do not ride the scooter on a steep slope, as the scooter may become uncontrollable or the brakes may not work sufficiently. Be especially careful when riding on uneven terrain. Do not ride at high speed downhill.
9. Ride the scooter only on level ground; do not ride on wet, uneven, stony or gravel surfaces. Do not ride the scooter at dusk or at night, or on damp or icy surfaces.
10. Avoid potholes, drainage grates and sudden changes in the road surface, as the scooter may stop suddenly.
11. Before you start riding, press the brake pedal and check that it works. With prolonged use of the scooter, the brake pedal may heat up, so do not touch it after stopping, as you may get burned.
12. Turn the scooter grip left and right and check that the mechanism works properly. Before you start riding, also make sure that the grips are held firmly.
13. Children must always ride under adult supervision. Before riding, the supervising person checks the scooter to ensure that all its parts are properly attached and to prevent an accident.
14. Since fingers can be pinched when assembling the scooter, adults must help children assemble and adjust the scooter. Do not touch moving parts or the clamping mechanism parts to avoid injuring your fingers. Make sure that all parts are firmly mounted.
15. Failure to follow the safety tips above may result in injury.
16. Promptly replace worn or broken parts of the device.

6-month warranty; the warranty does not apply to wear parts

The warranty is void if the device fails due to mechanical damage to the scooter, improper operation or performing prohibited maneuvers with it.

CHECK BEFORE RIDING

First, check that the brakes work.

Second, check that the grips are held properly and firmly.

Third, check that the wheels are firmly attached and spin without disturbances.

After checking everything and reading the safety tips, you can start riding the scooter.

USER INSTRUCTIONS AND DEVICE MAINTENANCE

1. Turn the scooter wheels and handlebar to check whether the bearings of the mechanisms work smoothly. If necessary, adjust them after the first few rides by tightening or loosening the clamping bolts.
2. It is recommended to fully disassemble and clean the scooter at least every 6 months. If a part needs to be replaced, make sure to order the correct part from the supplier (representative).
3. If the front part of the scooter (handlebar) is loose, the headtube mechanism is most likely not properly tightened. Do not ride with a loose handlebar. Remove the handlebar and tighten the headtube compression bolt with a hex key. Reinstall the handlebar and firmly tighten the handlebar clamp.
4. Polyurethane wheels may wear out over time. Contact the seller and replace them with new ones so that it is safe to ride.
5. With regular use of the scooter, the wheels and wheel bearings may wear out. They can be easily replaced. Undo the nuts securing the wheel axle and pull out the wheel. Replace the wheel or bearings and firmly retighten the nuts with a wrench on both sides of the wheel. Make sure to order suitable wheels or wheel bearings from the supplier (representative).
6. Clean dirt and dust from the scooter with a damp cloth. Do not use cleaners or solvents that may damage the surface. Do not use alcohol or substances containing alcohol or ammonia for cleaning, as they may damage the surface, dissolve parts or soften the stickers or sticker adhesive.
7. Before you start riding, make sure that all parts are firmly mounted.
8. Mechanisms or parts may work worse over time. If any mechanism or part does not work as it should, it is recommended not to use the device, to contact the supplier (representative) or importer, and to replace the mechanisms or parts with new ones.