Sacrifice Hustler V2 Stunt Scooter

The Sacrifice Hustler V2 stunt scooter is everything a beginner rider needs. Reliable parts and geometry inherited from the more expensive Sacrifice models come together perfectly in this scooter. An excellent choice as a first scooter.

• Handlebar: 13A Steel 550mm Wide x 600mm High
• Clamp: 2 bolt collar clamp with printed logo detail
• Compression: IHC
• Deck: Extruded 6061-T6 A1, 115mm x 500mm, Integrated 82.5 deg Headtube
• Wheels: 110mm split forked 5 spoke wheel, 70mm 6061-T6 Al Core with laser etched logo detail, 88A PU
• Bearings: ABEC 7
• With brake
• Weight: 3.6 kg

STUNT SCOOTER RULES OF USE

Safety measures

As with any moving device, riding a scooter can be dangerous. Before riding, read all the rules of use. Pay particular attention to the following tips:

1. Always wear protective equipment such as ANSI, SNELL, CPSC or ASTM certified helmets, knee and elbow guards, a long-sleeved shirt and long trousers.
2. Always wear closed shoes and make sure they are properly fastened. Do not use the scooter barefoot or in sandals.
3. Always follow the applicable traffic and scooter-riding rules. Watch out for other vehicles and give way to pedestrians.
4. Do not make any changes to the structure of the device and do not use any accessories that are not supplied with the scooter.
5. Do not ride holding the device with only one hand. Hold the grips firmly with both hands.
6. When riding, do not make sharp turns and do not lean with your whole body on the grips during a turn, as they may twist and you will lose control.
7. Do not ride the scooter on a slippery, wet road surface, as the polyurethane wheels may slip and you will lose control. Avoid roads where water, mud, sand, gravel, leaves or other debris accumulate. Riding in the rain worsens wheel grip, braking and visibility.
8. Do not ride the scooter on a steep slope, as the scooter may become uncontrollable or the brake may not work sufficiently. Be especially careful when riding on uneven terrain. Do not ride at high speed downhill.
9. Ride the scooter only on level ground; do not ride on wet, uneven, rocky or gravel surfaces. Do not ride the scooter at dusk or at night, or on damp or icy surfaces.
10. Avoid potholes, drainage grates and sudden changes in road surface, as the scooter may stop suddenly.
11. Before you start riding, press the brake pedal and check that it works. With prolonged use of the scooter, the brake pedal can heat up, so do not touch it after stopping, as you may burn yourself.
12. Turn the scooter's handlebar left and right and check that the mechanism works properly. Before you start riding, also make sure the grips are firmly attached.
13. Children must always ride under adult supervision. Before riding begins, the supervising person checks the scooter to ensure all its parts are properly secured and to prevent an accident.
14. Since fingers can get pinched while assembling the scooter, adults must help children assemble and adjust it. Do not touch moving parts or clamping mechanism parts to avoid injuring your fingers. Make sure all parts are firmly mounted.
15. If you do not follow the safety tips above, you may injure yourself.
16. Promptly replace worn or broken parts of the device.

6-month warranty; the warranty does not cover wear parts

The warranty is void if the device fails due to mechanical damage of the scooter, improper use or performing prohibited maneuvers with it.

CHECK BEFORE RIDING

First, check that the brakes work.

Second, check that the grips are properly and firmly attached.

Third, check that the wheels are firmly attached and rotate without interference.

Once you have checked everything and read the safety tips, you can start riding the scooter.

USER INSTRUCTIONS AND DEVICE CARE

1. Spin the scooter's wheels and turn the handlebar to check whether the mechanism bearings run smoothly. If necessary, adjust them after the first few rides by tightening or loosening the clamping bolts.
2. It is recommended to fully disassemble and clean the scooter at least every 6 months. If a part needs replacing, make sure to order the correct part from the supplier (representative).
3. If the front part of the scooter (the handlebar) is loose, the steering column mechanism is most likely not properly tightened. Do not ride with a loose handlebar. Remove the handlebar and tighten the steering column compression bolt with a hex key. Reinstall the handlebar and firmly tighten the handlebar clamp.
4. Polyurethane wheels may wear out over time. Contact the seller and replace them with new ones so it is safe to ride.
5. With regular use of the scooter, the wheels and wheel bearings may wear out. They can be easily replaced. Undo the nuts securing the wheel axle and pull out the wheel. Replace the wheel or bearings and firmly tighten the nuts again with a wrench from both sides of the wheel. Make sure to order the correct wheels or wheel bearings from the supplier (representative).
6. Clean dirt and dust off the scooter with a damp cloth. Do not use cleaners or solvents that may damage the surface. Do not use alcohol or substances containing alcohol or ammonia for cleaning, as they may damage the surface, dissolve parts or soften stickers or sticker adhesive.
7. Before you start riding, make sure all parts are firmly mounted.
8. Mechanisms or parts may work worse over time. If any mechanism or part does not work as it should, it is recommended not to use the device, contact the supplier (representative) or importer and replace the mechanisms or parts with new ones.