Chilli Pro Base Stunt Scooter

The Chilli Pro Base stunt scooter is designed for beginner riders getting to know simple tricks. A new addition to the latest collection, it stands out with excellent components at a low price. It features a reliable chromium-molybdenum alloy bar, single-alloy wheel rims and high-quality wheels.

• Handlebar: 4130 CrMo steel (58 x 58 cm)
• Clamp: 2-bolt CNC aluminium HIC clamp
• Compression: Universal HIC system
• Deck: 6061 aluminium (50 x 11.5 cm)
• Wheels: 110 mm spoke wheels, aluminium core 90A
• Bearings: ABEC 9
• With brake
• Height: 79 cm
• Weight: 3.5 kg

RULES FOR USING THE STUNT SCOOTER

Safety measures

As with any other moving device, riding a scooter can be dangerous. Before riding, read all the usage rules. Pay particular attention to the following advice:

1. Always wear protective equipment such as ANSI, SNELL, CPSC or ASTM certified helmets, knee and elbow protectors, long-sleeved shirts and long trousers.
2. Always wear closed footwear and make sure it is properly fastened. Do not use the scooter barefoot or in sandals.
3. Always follow the applicable traffic and scooter riding rules. Watch out for other vehicles and give way to pedestrians.
4. Do not make any changes to the device's structure and do not use any accessories that are not supplied with the scooter.
5. Do not ride holding the device with only one hand. Hold the handles firmly with both hands.
6. When riding the scooter, do not make sharp turns and do not lean your whole body on the handles in a turn, as they may twist and you may lose control.
7. Do not ride the scooter on slippery or wet road surfaces, as the polyurethane wheels may slip and you may lose control. Avoid roads where water, mud, sand, gravel, leaves or other debris accumulate. When riding in the rain, wheel grip, braking and visibility conditions deteriorate.
8. Do not ride the scooter on steep slopes, as the scooter may become uncontrollable or the brakes may not work sufficiently. Be especially careful when riding on uneven ground. Do not ride at high speed downhill.
9. Ride the scooter only on level ground; do not ride on wet, uneven, stony or gravel surfaces. Do not ride the scooter at dusk or at night, or on damp or icy surfaces.
10. Avoid potholes, drainage grates and sudden changes in the road surface, as the scooter may stop abruptly.
11. Before riding, press the brake pedal and check that it works. With prolonged use of the scooter, the brake pedal may heat up, so do not touch it when you stop, as you may get burned.
12. Turn the scooter handle left and right and check that the mechanism works properly. Before riding, also make sure that the handles are firmly in place.
13. Children must always ride under adult supervision. Before riding, the supervising person should check the scooter to make sure all its parts are properly fastened and to avoid accidents.
14. Because fingers can be pinched when assembling the scooter, adults must help children assemble and adjust the scooter. Do not touch moving parts or the parts of the clamping mechanism to avoid injuring your fingers. Make sure all parts are firmly assembled.
15. If you do not follow the safety advice above, you may get injured.
16. Promptly replace worn or broken parts of the device.

6-month warranty; the warranty does not cover wear parts

The warranty is void if the device fails due to mechanical damage to the scooter, improper use or performing prohibited manoeuvres with it.

CHECK BEFORE RIDING

First, check that the brakes work.

Second, check that the handles are properly and firmly in place.

Third, check that the wheels are firmly attached and spin without disturbance.

Once you have checked everything and read the safety advice, you can start riding the scooter.

USER INSTRUCTIONS AND DEVICE MAINTENANCE

1. Turn the scooter's wheels and bar to check that the mechanism bearings run smoothly. If necessary, adjust them after the first few rides by tightening or loosening the clamping bolts.
2. It is recommended to fully disassemble and clean the scooter at least every 6 months. If a part needs to be replaced, make sure to order the correct part from the supplier (dealer).
3. If the front part of the scooter (the bar) is loose, the fork/steerer clamp mechanism is probably not properly tightened. Do not ride with a loose bar. Remove the bar and tighten the compression bolt with a hex key. Reinstall the bar and firmly tighten the bar clamp.
4. Polyurethane wheels may wear out over time. Contact the seller and replace them with new ones so that it is safe to ride.
5. With regular use of the scooter, the wheels and wheel bearings may wear out. They can be easily replaced. Unscrew the nuts securing the wheel axle and pull out the wheel. Replace the wheel or bearings and firmly tighten the nuts with a wrench from both sides of the wheel. Make sure to order the correct wheels or wheel bearings from the supplier (dealer).
6. Clean dirt and dust off the scooter with a damp cloth. Do not use cleaners or solvents that may damage the surface. Do not use alcohol or substances containing alcohol or ammonia for cleaning, as they may damage the surface, dissolve parts or soften stickers or sticker adhesive.
7. Before riding, make sure that all parts are firmly assembled.
8. Mechanisms or parts may work less well over time. If any mechanism or part does not work as it should, it is recommended not to use the device, to contact the supplier (dealer) or importer, and to replace the mechanisms or parts with new ones.