Chilli Pro Base Stunt Scooter

The Chilli Pro Base stunt scooter is designed for beginner riders to get acquainted with simple tricks. A new addition to the latest collection, it stands out with its excellent specification at an affordable price. It features a reliable chromoly (chromium-molybdenum alloy) bar, solid alloy rims and high-quality wheels.

• Handlebar: 4130 CrMo steel (58 x 58 cm)
• Clamp: 2-bolt CNC aluminium HIC clamp
• Compression: Universal HIC system
• Deck: 6061 aluminium (50 x 11.5 cm)
• Wheels: 110 mm spoke wheels, aluminium core, 90A
• Bearings: ABEC 9
• With brake
• Height: 79 cm
• Weight: 3.5 kg

STUNT SCOOTER RULES OF USE

Safety measures

As with any other moving device, riding a scooter can be dangerous. Before riding, read all the rules of use. Pay particular attention to the following advice:

1. Always wear protective gear, such as an ANSI, SNELL, CPSC or ASTM certified helmet, knee and elbow pads, a long-sleeved shirt and long trousers.
2. Always wear closed shoes and make sure they are properly fastened. Do not use the scooter barefoot or in sandals.
3. Always follow the applicable traffic and scooter-riding rules. Watch out for other vehicles and give way to pedestrians.
4. Do not make any changes to the structure of the device and do not use any accessories that are not supplied with the scooter.
5. Do not ride holding the device with only one hand. Hold the grips firmly with both hands.
6. When riding the scooter, do not make sudden turns and do not lean on the grips with your whole body in a turn, as they may twist and you may lose control.
7. Do not ride the scooter on slippery or wet road surfaces, as the polyurethane wheels may slip and you may lose control. Avoid roads where water, mud, sand, gravel, leaves or other debris accumulate. In the rain, wheel grip on the road surface, braking and visibility conditions deteriorate.
8. Do not ride the scooter on a steep slope, as the scooter may become uncontrollable or the brake may not work well enough. Be especially careful when riding on uneven terrain. Do not ride at high speed downhill.
9. Ride the scooter only on level ground; do not ride on wet, uneven, rocky or gravel surfaces. Do not ride the scooter at dusk or at night, or on damp or icy surfaces.
10. Avoid potholes, drainage grates and sudden changes in the road surface, as the scooter may stop abruptly.
11. Before riding, press the brake pad and check that it works. With prolonged use of the scooter, the brake pad may heat up, so do not touch it after stopping, as you may get burned.
12. Turn the scooter's handlebar to the left and right and check that the mechanism works properly. Before riding, also make sure the grips are firmly in place.
13. Children must always ride under the supervision of an adult. Before riding, the supervising person checks the scooter to ensure that all its parts are properly attached and to avoid an accident.
14. Since fingers can be pinched when assembling the scooter, adults must help children assemble and adjust the scooter. Do not touch moving parts or parts of the clamping mechanism, so as not to injure your fingers. Make sure all parts are firmly mounted.
15. If you do not follow the safety advice above, you may get injured.
16. Promptly replace worn or broken parts of the device.

6-month warranty; the warranty does not cover wearing parts

The warranty is void if the device breaks down due to mechanical damage to the scooter, improper use or performing prohibited manoeuvres with it.

CHECK BEFORE RIDING

First, check that the brakes work.

Second, check that the grips are properly and firmly in place.

Third, check that the wheels are firmly attached and spin without interference.

Once you have checked everything and read the safety advice, you can start riding the scooter.

USER INSTRUCTIONS AND DEVICE CARE

1. Turn the scooter's wheels and bar to check whether the bearings of the mechanisms run smoothly. If necessary, adjust them after the first few rides by tightening or loosening the clamping bolts.
2. It is recommended to fully disassemble and clean the scooter at least every 6 months. If a part needs to be replaced, make sure to order the correct part from the supplier (representative).
3. If the front part of the scooter (the bar) is loose, the fork tube mechanism is most likely not properly tightened. Do not ride with a loose bar. Remove the bar and tighten the compression bolt with a hex key. Reinstall the bar and firmly tighten the bar clamp.
4. Polyurethane wheels may wear out over time. Contact the seller and replace them with new ones so that riding is safe.
5. With regular use of the scooter, the wheels and wheel bearings may wear out. They can be easily replaced. Undo the nuts securing the wheel axle and pull out the wheel. Replace the wheel or bearings and firmly retighten the nuts with a wrench on both sides of the wheel. Make sure to order the correct wheels or wheel bearings from the supplier (representative).
6. Clean dirt and dust off the scooter with a damp cloth. Do not use cleaners or solvents that may damage the surface. Do not use alcohol or substances containing alcohol or ammonia for cleaning, as they may damage the surface, dissolve parts or soften stickers or sticker adhesive.
7. Before riding, make sure all parts are firmly mounted.
8. Mechanisms or parts may work less well over time. If any mechanism or part does not work as it should, it is recommended not to use the device, to contact the supplier (representative) or importer and to replace the mechanisms or parts with new ones.